Contact Us Today

Part #: 3-1517

Part Number: 3-1517

Description: R1700 PVC Rough Top-HI
Color : Red
Plies: 1

Nominal OAG: 

0.34

 +/- 

0.01
Recessed OAG: 
0.165
Fabric: 
Interwoven Polyester

Top Surface: 

Rough Top Impression

Bottom Surface: 

Brushed
Compound: 
PVC
Work Tension: 
170

Elongation: 

Less than 2%

Weight: 

0.117

Minimum Pulley Diameter: 

4

Back Flex Min. Pulley Diameter: 

6

Working Temperature: 

0 to 180

Max. Stocked Width: 

72

Top Cover Coefficient of Friction/Steel: 

1.3

Bottom Cover Coefficient of Friction/Steel: 

0.3
665_photo.jpg
1 of 3 3-1517 Close Up

Related Documents

Features: 

3-1517 features the popular interwoven carcass with a conventional hemp impression rough top. The belt has a brushed bottom surface for a low coefficient of friction. This belt also has some oil resistant qualities. NOTE–The impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. R1700 PVC R/T-HI Red can be used as a heavy duty incline belt where the angle is moderate. It is used to convey luggage, boxes, plastic, paper, corrugated cardboard, wood and lumber.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication AV-3 AV-3 A Section V-Guide - PVC V-Guide
Fabrication AVN-3 AVN-3 A Section V-Guide Notched - PVC V-Guide
Fabrication BC-3 BC-3 B Section Cleat - PVC Cleat
Fabrication BC2-3 BC2-3 2" Beefy Cleat - PVC Cleat
Fabrication BV-3 BV-3 B Section V-Guide - PVC V-Guide
Fabrication BVN-3 BVN-3 B Section V-Guide Notched - PVC V-Guide
Fabrication CV-3 CV-3 C Section V-Guide - PVC V-Guide
Fabrication CVN-3 CVN-3 C Section V-Guide Notched - PVC V-Guide
Fabrication E-H E-H Endless - Finger Splice Interwoven 2 Endless
No image HLA2 Alligator Laced Both Ends – Hidden Lace Lacing
No image HLC2 Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLCSU2 HLCSU2 Coated Steel Unibar Both Ends – Hidden Lace Lacing
No image HLSSC2 S/S Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLSSU2 HLSSU2 S/S Unibar Both Ends – Hidden Lace Lacing
No image HP Hole Punch Hole Punch
Fabrication K6V-3 K6V-3 K6 Section V-Guide - PVC V-Guide
Fabrication K6VN-3 K6VN-3 K6 Section V-Guide Notched - PVC V-Guide
Fabrication K8V-3 K8V-3 K8 Section V-Guide - PVC V-Guide
Fabrication K8VN-3 K8VN-3 K8 Section V-Guide Notched - PVC V-Guide
Fabrication LONG - IW LONG - IW Longitudinal Splice - IW Longitudinal
Fabrication OV-3 OV-3 O Section V-Guide - PVC V-Guide
Fabrication OVN-3 OVN-3 O Section V-Guide Notched - PVC V-Guide
No image PE-H Prepared Ends – Interwoven Finger Splice 2 Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RCSU1 Coated Steel Unibar One End – Recessed Lacing
No image RCSU2 Coated Steel Unibar Both Ends – Recessed Lacing
No image RFR2 Flexco Rivet Laced Both Ends – Recessed Lacing
No image RMS1 Megalloy Staple Laced One End – Recessed Lacing
No image RMS2 Megalloy Staple Laced Both Ends – Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication RSSC1 RSSC1 S/S Clipper Laced One End - Recessed Lacing
Fabrication RSSC2 RSSC2 S/S Clipper Laced Both Ends - Recessed Lacing
No image RSSU1 S/S Unibar One End – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication TC3-3 TC3-3 3" Tee Cleat - PVC Cleat
Download Spec Page

Part Number: 3-1517

Description: R1700 PVC Rough Top-HI
Color : Red
Plies: 1
Nominal OAG: 0.34″
 +/- 0.01″
 Recessed OAG: 0.165″
Fabric: Interwoven Polyester
Top Surface: Rough Top Impression
Bottom Surface: Brushed
Compound: PVC
Chemical Resistance Chart
Work Tension: 170 lbs./PIW
Elongation: Less than 2%
Weight: 0.117 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 4″
Back Flex Min. Pulley Diameter: 6″
Profile Min. Pulley Diameter Chart
Working Temperature (F): 0 to 180
Stock Width: 72″
Top Cover Coefficient of Friction: 1.3
Bottom Cover Coefficient of Friction: 0.3
MinPulleyChart: 0
3-1517 Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

3-1517 features the popular interwoven carcass with a conventional hemp impression rough top. The belt has a brushed bottom surface for a low coefficient of friction. This belt also has some oil resistant qualities. NOTE–The impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. R1700 PVC R/T-HI Red can be used as a heavy duty incline belt where the angle is moderate. It is used to convey luggage, boxes, plastic, paper, corrugated cardboard, wood and lumber.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com