Nominal OAG:
+/-
Top Surface:
Bottom Surface:
Elongation:
Weight:
Working Temperature:
Max. Stocked Width:
Hardness:
| Tension Rating | Min. Pulley Dia. (in) | Min. Pulley Dia. (mm) |
|---|---|---|
| Over 80% | 18" | 457.2 mm |
| 60%-80% | 16" | 406.4 mm |
| 40%-60% | 14" | 355.6 mm |
| Below 40%, tails, snubs | 12" | 304.8 mm |
5-8502 features a 1/4″ high, 6″ wide chevron profile in a staggered pattern. The OAG includes the profile. Use the Recessed OAG for the Lacing Recommendation. 3 Ply 1/8″ x Bare Cleated Incline MOR is popular in bulk conveying where oil is a concern. This is a popular specification on Diamond Z grinders.
5-8502 features a 1/4″ high, 6″ wide chevron profile in a staggered pattern. The OAG includes the profile. Use the Recessed OAG for the Lacing Recommendation. 3 Ply 1/8″ x Bare Cleated Incline MOR is popular in bulk conveying where oil is a concern. This is a popular specification on Diamond Z grinders.
Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.
Copyright © 2025 by mulhernbelting..com
Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.
Copyright © 2025 by mulhernbelting..com