 
															Nominal OAG:
+/-
Top Surface:
Bottom Surface:
Elongation:
Weight:
 
															Working Temperature:
Max. Stocked Width:
| Tension Rating | Min. Pulley Dia. (in) | Min. Pulley Dia. (mm) | 
|---|---|---|
| Over 80% | 16" | 406.4 mm | 
| 60%-80% | 14" | 355.6 mm | 
| 40%-60% | 12" | 304.8 mm | 
| Below 40%, tails, snubs | 10" | 254 mm | 
5-7502 features a 1/4″ high, 6″ wide chevron profile in a staggered pattern. The OAG includes the profile. Use the Recessed OAG for the Lacing Recommendation. 2 Ply 1/8″ x Bare Cleated Incline MOR is used in bulk conveying where oil is a concern. This is a popular specification on Diamond Z grinders and in the recycling industry.
 
															 
															5-7502 features a 1/4″ high, 6″ wide chevron profile in a staggered pattern. The OAG includes the profile. Use the Recessed OAG for the Lacing Recommendation. 2 Ply 1/8″ x Bare Cleated Incline MOR is used in bulk conveying where oil is a concern. This is a popular specification on Diamond Z grinders and in the recycling industry.
 
															Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.
Copyright © 2025 by mulhernbelting..com
 
															Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.
Copyright © 2025 by mulhernbelting..com