Contact Us Today

Part #: 3-3513

Part Number: 3-3513

Description: W1200 Crescent Top – MOR
Color : White
Plies: 1

Nominal OAG: 

0.22

 +/- 

0.03
Recessed OAG: 
0.14
Fabric: 
Interwoven Polyester

Top Surface: 

Crescent Impression

Bottom Surface: 

Brushed
Compound: 
RAV
Work Tension: 
120

Elongation: 

Less than 2%

Weight: 

0.08

Minimum Pulley Diameter: 

2

Back Flex Min. Pulley Diameter: 

3

Working Temperature: 

0 to 180

Max. Stocked Width: 

72

Top Cover Coefficient of Friction/Steel: 

1.3

Bottom Cover Coefficient of Friction/Steel: 

0.8
Attributes: Oil Resistant, Sliderbed Suitable, Troughable
3338_photo.png 3338_photo1.jpg 3338_photo2.jpg
1 of 3 3338_photo.png

Related Documents

Features: 

3-3513 features the popular interwoven carcass with an 1/8″ high half moon (crescent) impression. The belt has a brushed bottom for a low coefficient of friction. The PVC compound is oil resistant. NOTE–The crescent impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. W1200 Crescent Top is very popular in the agricultural industry for the movement of bulk materials and in the post office to move small packages.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication AV-3 AV-3 A Section V-Guide - PVC V-Guide
Fabrication AVN-3 AVN-3 A Section V-Guide Notched - PVC V-Guide
Fabrication BV-3 BV-3 B Section V-Guide - PVC V-Guide
Fabrication BVN-3 BVN-3 B Section V-Guide Notched - PVC V-Guide
No image CFRP2 Plastic Rivet Laced Both Ends – Cover Flap Lacing
Fabrication CV-3 CV-3 C Section V-Guide - PVC V-Guide
Fabrication CVN-3 CVN-3 C Section V-Guide Notched - PVC V-Guide
Fabrication E-G E-G Endless - Finger Splice Interwoven 1 Endless
Fabrication FLG1DS-3 FLG1DS-3 1" High Flange Drilled and Siped - PVC Flange
No image HP Hole Punch Hole Punch
Fabrication K6V-3 K6V-3 K6 Section V-Guide - PVC V-Guide
Fabrication K6VN-3 K6VN-3 K6 Section V-Guide Notched - PVC V-Guide
Fabrication K8V-3 K8V-3 K8 Section V-Guide - PVC V-Guide
Fabrication K8VN-3 K8VN-3 K8 Section V-Guide Notched - PVC V-Guide
Fabrication LONG - IW LONG - IW Longitudinal Splice - IW Longitudinal
Fabrication OV-3 OV-3 O Section V-Guide - PVC V-Guide
Fabrication OVN-3 OVN-3 O Section V-Guide Notched - PVC V-Guide
Fabrication P1 P1 Plastic Rivet Laced One End Lacing
Fabrication P2 P2 Plastic Rivet Laced Both Ends Lacing
No image PE-G Prepared Ends – Interwoven Finger Splice 1 Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RFH1 Flexco Hinge Laced One End - Recessed Lacing
No image RFH2 Flexco Hinge Laced Both Ends - Recessed Lacing
No image RMS1 Megalloy Staple Laced One End – Recessed Lacing
No image RMS2 Megalloy Staple Laced Both Ends – Recessed Lacing
No image RP1 Plastic Rivet Laced One End - Recessed Lacing
No image RP2 Plastic Rivet Laced Both Ends - Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication RSSC1 RSSC1 S/S Clipper Laced One End - Recessed Lacing
Fabrication RSSC2 RSSC2 S/S Clipper Laced Both Ends - Recessed Lacing
No image RSSU1 S/S Unibar One End – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication TC1-3 TC1-3 1" Tee Cleat - PVC Cleat
Fabrication TC2-3 TC2-3 2" Tee Cleat - PVC Cleat
Fabrication WIB310 WIB310 1" High Black Weldwall Sidewall
Splicing Instructions
Download Spec Page

Part Number: 3-3513

Description: W1200 Crescent Top – MOR
Color : White
Plies: 1
Nominal OAG: 0.22″
 +/- 0.03″
 Recessed OAG: 0.14″
Fabric: Interwoven Polyester
Top Surface: Crescent Impression
Bottom Surface: Brushed
Compound: RAV
Chemical Resistance Chart
Work Tension: 120 lbs./PIW
Elongation: Less than 2%
Weight: 0.08 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 2″
Back Flex Min. Pulley Diameter: 3″
Profile Min. Pulley Diameter Chart
Working Temperature (F): 0 to 180
Stock Width: 72″
Attributes: Oil Resistant, Sliderbed Suitable, Troughable
Top Cover Coefficient of Friction: 1.3
Bottom Cover Coefficient of Friction: 0.8
MinPulleyChart: 0
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Oil-Resistant Conveyor Belts Explained
Duration: [04:23]
Features: 

3-3513 features the popular interwoven carcass with an 1/8″ high half moon (crescent) impression. The belt has a brushed bottom for a low coefficient of friction. The PVC compound is oil resistant. NOTE–The crescent impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. W1200 Crescent Top is very popular in the agricultural industry for the movement of bulk materials and in the post office to move small packages.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com