Contact Us Today

Part #: 1-1120

Part Number: 1-1120

Description: U2W Poli-Glide 5S/2U/FS
Color : White
Plies: 2

Nominal OAG: 

0.06

 +/- 

0.015
Fabric: 
Polyester

Top Surface: 

Smooth Cover (Satin)

Bottom Surface: 

Friction Surface
Compound: 
Poly Urethane
Work Tension: 
35

Elongation: 

Less than 3%

Weight: 

0.03

Minimum Pulley Diameter: 

0.8

Back Flex Min. Pulley Diameter: 

1.2

Working Temperature: 

-22 to 176

Max. Stocked Width: 

78.75

Hardness: 

90a
Attributes: Abrasion Resistant, FDA Compliant, Nosebar Suitable, Sliderbed Suitable
654_photo.jpg
1 of 3 1-1120 Close Up

Related Documents

Features: 

This belt features a two ply spun polyester with a thin white urethane top cover. It can transverse the smallester pulleys while maintaining cross rigidty. The urethane cover is easily cleaned. Refer to the chemical resistance chart when choosing a cleaning solution. U2W Poli-Glide 5S/2U/FS is widely used in bakeries and candy plants. Primary uses are enrobers/cooling lines/cheese mfg./poultry plants/dough transfers.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication A1 A1 Alligator Laced One End Lacing
Fabrication A2 A2 Alligator Laced Both Ends Lacing
Fabrication AV-4 AV-4 A Section V-Guide - Urethane V-Guide
Fabrication AVN-4 AVN-4 A Section V-Guide Notched - Urethane V-Guide
Fabrication B-4 B-4 5 Hole Bucket Punch (B-4) Hole Punch
Fabrication BV-4 BV-4 B Section V-Guide - Urethane V-Guide
Fabrication C1 C1 Clipper Laced One End Lacing
Fabrication C2 C2 Clipper Laced Both Ends Lacing
Fabrication CV-4 CV-4 C Section V-Guide - Urethane V-Guide
Fabrication CVN-4 CVN-4 C Section V-Guide Notched - Urethane V-Guide
Fabrication E-E E-E Endless- Finger Splice Endless
No image FSL2 Finger Spiral Laced Both Ends Lacing
No image HP Hole Punch Hole Punch
Fabrication OV-4 OV-4 O Section V-Guide - Urethane V-Guide
Fabrication OVN-4 OVN-4 O Section V-Guide Notched - Urethane V-Guide
Fabrication P1 P1 Plastic Rivet Laced One End Lacing
Fabrication P2 P2 Plastic Rivet Laced Both Ends Lacing
No image PE-E Prepared Ends - Finger Splice Endless
Fabrication Perforation Perforation Perforation Hole Punch
Fabrication S1 S1 Staple Laced One End Lacing
Fabrication S2 S2 Staple Laced Both Ends Lacing
Fabrication SIW410 SIW410 1-3/16" Sidewall with Base - Urethane Sidewall
Fabrication SIW415 SIW415 1-9/16" Sidewall with Base - Urethane Sidewall
Fabrication SIW420 SIW420 2" High Sidewall with Base - Urethane Sidewall
Fabrication SIW430 SIW430 3" High Sidewall with Base - Urethane Sidewall
Fabrication SS1 SS1 S/S Staple Laced One End Lacing
Fabrication SS2 SS2 S/S Staple Laced Both Ends Lacing
Fabrication SSA1 SSA1 S/S Alligator Laced One End Lacing
Fabrication SSA2 SSA2 S/S Alligator Laced Both Ends Lacing
Fabrication SSC1 SSC1 S/S Clipper Laced One End Lacing
Fabrication SSC2 SSC2 S/S Clipper Laced Both Ends Lacing
Fabrication SSU1 SSU1 S/S Unibar One End Lacing
Fabrication SSU2 SSU2 S/S Unibar Both Ends Lacing
Fabrication TC1-4 TC1-4 1" Tee Cleat - Urethane Cleat
Fabrication TC105-4 TC105-4 1-1/2" Tee Cleat - Urethane Cleat
Fabrication TC2-4 TC2-4 2" Tee Cleat - Urethane Cleat
Fabrication TL05-4 TL05-4 1/2" Thin Line Cleat - Urethane Cleat
Fabrication TL1-4 TL1-4 1" Thin Line Cleat - Urethane Cleat
Fabrication TL105-4 TL105-4 1-1/2" Thin Line Cleat - Urethane Cleat
Fabrication TL2-4 TL2-4 2" Thin Line Cleat - Urethane Cleat
Fabrication TL205-4 TL205-4 2-1/2" Thin Line Cleat - Urethane Cleat
Splicing Instructions
Download Spec Page

Part Number: 1-1120

Description: U2W Poli-Glide 5S/2U/FS
Color : White
Plies: 2
Nominal OAG: 0.06″
 +/- 0.015″
Fabric: Polyester
Top Surface: Smooth Cover (Satin)
Bottom Surface: Friction Surface
Compound: Poly Urethane
Chemical Resistance Chart
Work Tension: 35 lbs./PIW
Elongation: Less than 3%
Weight: 0.03 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 0.8″
Back Flex Min. Pulley Diameter: 1.2″
Profile Min. Pulley Diameter Chart
Working Temperature (F): -22 to 176
Stock Width: 78.75″
Attributes: Abrasion Resistant, FDA Compliant, Nosebar Suitable, Sliderbed Suitable
Hardness: 90a
MinPulleyChart: 0
1-1120 Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

This belt features a two ply spun polyester with a thin white urethane top cover. It can transverse the smallester pulleys while maintaining cross rigidty. The urethane cover is easily cleaned. Refer to the chemical resistance chart when choosing a cleaning solution. U2W Poli-Glide 5S/2U/FS is widely used in bakeries and candy plants. Primary uses are enrobers/cooling lines/cheese mfg./poultry plants/dough transfers.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com