Contact Us Today

Part #: 3-1213

Part Number: 3-1213

Description: 3 Ply MOR Rough Top
Color : Black
Plies: 3

Nominal OAG: 

0.3

 +/- 

0.03
Recessed OAG: 
0.13
Fabric: 
Cotton/Polyester

Top Surface: 

Hemp Impression Rough Top

Bottom Surface: 

Bare Surface
Compound: 
MOR
Work Tension: 
225

Elongation: 

Less than 2%

Weight: 

0.12

Minimum Pulley Diameter: 

3

Back Flex Min. Pulley Diameter: 

4.5

Working Temperature: 

-20 to 250

Max. Stocked Width: 

72

Top Cover Coefficient of Friction/Steel: 

1

Bottom Cover Coefficient of Friction/Steel: 

0.3
Attributes: Sliderbed Suitable, Troughable, Oil Resistant
123_photo.jpg 123_photo1.jpg
1 of 3 3-1213 Close Up

Related Documents

Features: 

3-1213 offers excellent gripping for standard incline conveyors. The MOR compound ensures oil resistant. The Cotton/Polyester carcass gives a hefty appearance and a cushioning effect on the conveyed product. NOTE–The Rough Top must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 3 Ply MOR Rough Top will handle most all products including boxed, bagged or packaged goods. The MOR is oil resistant.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication AC-7 AC-7 A Section Cleat - MOR Cleat
Fabrication BC-7 BC-7 B Section Cleat - MOR Cleat
Fabrication BC2-7 BC2-7 2" Beefy Cleat - MOR Cleat
Fabrication CC-7 CC-7 C Section Cleat - MOR Cleat
Fabrication CFC2 CFC2 Clipper Laced Both Ends – Cover Flap Lacing
Fabrication E-A E-A Endless - Lap Splice Endless
Fabrication FLG1-2 FLG1-2 1" High Flange - SBR Flange
No image FP3NL Flexco Plate Prepared (No Lacing Included) Lacing
No image HLC2 Clipper Laced Both Ends – Hidden Lace Lacing
No image HLS2 Staple Laced Both Ends – Hidden Lace Lacing
No image HLSSC2 S/S Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLSSU2 HLSSU2 S/S Unibar Both Ends – Hidden Lace Lacing
No image HP Hole Punch Hole Punch
Fabrication LONG - LW LONG - LW Longitudinal Splice - LW Longitudinal
Fabrication LUG0505-7 LUG0505-7 1/2" x 1/2" Lug - MOR Cleat
Fabrication LUG11-7 LUG11-7 1" x 1" Lug - MOR Cleat
Fabrication P2 P2 Plastic Rivet Laced Both Ends Lacing
No image PE-A Prepared Ends - Lap Splice Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RCSU1 Coated Steel Unibar One End – Recessed Lacing
No image RCSU2 Coated Steel Unibar Both Ends – Recessed Lacing
No image RFH1 Flexco Hinge Laced One End - Recessed Lacing
No image RFH2 Flexco Hinge Laced Both Ends - Recessed Lacing
No image RFR1 Flexco Rivet Laced One End - Recessed Lacing
No image RFR2 Flexco Rivet Laced Both Ends – Recessed Lacing
No image RP2 Plastic Rivet Laced Both Ends - Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication RSSC1 RSSC1 S/S Clipper Laced One End - Recessed Lacing
Fabrication RSSC2 RSSC2 S/S Clipper Laced Both Ends - Recessed Lacing
No image RSSU1 S/S Unibar One End – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication SFH2 SFH2 S/S Flexco Hinge Laced Both Ends Lacing
Fabrication SIC405-7 SIC405-7 4-1/2" SI Cleat - MOR Cleat
Fabrication TC1-7 TC1-7 1" Tee Cleat - MOR Cleat
Fabrication TC105-7 TC105-7 1-1/2" Tee Cleat - MOR Cleat
Download Spec Page

Part Number: 3-1213

Description: 3 Ply MOR Rough Top
Color : Black
Plies: 3
Nominal OAG: 0.3″
 +/- 0.03″
 Recessed OAG: 0.13″
Fabric: Cotton/Polyester
Top Surface: Hemp Impression Rough Top
Bottom Surface: Bare Surface
Compound: MOR
Chemical Resistance Chart
Work Tension: 225 lbs./PIW
Elongation: Less than 2%
Weight: 0.12 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 3″
Back Flex Min. Pulley Diameter: 4.5″
Profile Min. Pulley Diameter Chart
Working Temperature (F): -20 to 250
Stock Width: 72″
Attributes: Sliderbed Suitable, Troughable, Oil Resistant
Top Cover Coefficient of Friction: 1
Bottom Cover Coefficient of Friction: 0.3
MinPulleyChart: 0
3-1213 Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

3-1213 offers excellent gripping for standard incline conveyors. The MOR compound ensures oil resistant. The Cotton/Polyester carcass gives a hefty appearance and a cushioning effect on the conveyed product. NOTE–The Rough Top must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 3 Ply MOR Rough Top will handle most all products including boxed, bagged or packaged goods. The MOR is oil resistant.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com