Contact Us Today

Part #: 3-1502

Part Number: 3-1502

Description: P2G Mono-Ruff-H 8M/HP/BP
Color : Green
Plies: 2

Nominal OAG: 

0.265

 +/- 

0.02
Recessed OAG: 
0.08
Fabric: 
Monofilament

Top Surface: 

Hemp Impression Rough Top

Bottom Surface: 

Bare
Compound: 
PVC
Work Tension: 
100

Elongation: 

Less than 2%

Weight: 

0.071

Minimum Pulley Diameter: 

3

Back Flex Min. Pulley Diameter: 

4.5

Working Temperature: 

20 to 180

Max. Stocked Width: 

72
Attributes: Cross Rigid, Anti-Static, Sliderbed Suitable
790_photo.jpg 790_photo1.jpg
1 of 3 3-1502 Close Up

Related Documents

Features: 

3-1502 features a PVC compound with a Hemp Impression Top Cover. It offers excellent gripping for standard incline conveyors. The carcass is high strength and low stretch. This belt is anti-static. NOTE–The rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. P2G Mono-Ruff-H 8M/HP/BP will handle most all products including boxed, bagged or packaged goods. This belt is non-marking belt. It will lie flat due to the monofilament carcass.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication AC-3 AC-3 A Section Cleat - PVC Cleat
Fabrication AV-3 AV-3 A Section V-Guide - PVC V-Guide
Fabrication AVN-3 AVN-3 A Section V-Guide Notched - PVC V-Guide
Fabrication BC-3 BC-3 B Section Cleat - PVC Cleat
Fabrication BC2-3 BC2-3 2" Beefy Cleat - PVC Cleat
Fabrication BV-3 BV-3 B Section V-Guide - PVC V-Guide
Fabrication BVN-3 BVN-3 B Section V-Guide Notched - PVC V-Guide
Fabrication CC-3 CC-3 C Section Cleat - PVC Cleat
Fabrication CV-3 CV-3 C Section V-Guide - PVC V-Guide
Fabrication CVN-3 CVN-3 C Section V-Guide Notched - PVC V-Guide
Fabrication E-A E-A Endless - Lap Splice Endless
Fabrication E-E E-E Endless- Finger Splice Endless
No image HP Hole Punch Hole Punch
Fabrication K6V-3 K6V-3 K6 Section V-Guide - PVC V-Guide
Fabrication K6VN-3 K6VN-3 K6 Section V-Guide Notched - PVC V-Guide
Fabrication K8V-3 K8V-3 K8 Section V-Guide - PVC V-Guide
Fabrication K8VN-3 K8VN-3 K8 Section V-Guide Notched - PVC V-Guide
Fabrication LONG - LW LONG - LW Longitudinal Splice - LW Longitudinal
Fabrication OC-3 OC-3 O Section Cleat - PVC Cleat
Fabrication OV-3 OV-3 O Section V-Guide - PVC V-Guide
Fabrication OVN-3 OVN-3 O Section V-Guide Notched - PVC V-Guide
No image PE-A Prepared Ends - Lap Splice Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RCSU1 Coated Steel Unibar One End – Recessed Lacing
No image RCSU2 Coated Steel Unibar Both Ends – Recessed Lacing
No image RP1 Plastic Rivet Laced One End - Recessed Lacing
No image RP2 Plastic Rivet Laced Both Ends - Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
No image RSL2 Spiral Laced Both Ends - R Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication RSSC1 RSSC1 S/S Clipper Laced One End - Recessed Lacing
Fabrication RSSC2 RSSC2 S/S Clipper Laced Both Ends - Recessed Lacing
No image RSSU1 S/S Unibar One End – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication SC105-3 SC105-3 1-1/2" Scoop Cleat - PVC Cleat
Fabrication SC2-3 SC2-3 2" Scoop Cleat - PVC Cleat
Fabrication SC205-3 SC205-3 2-1/2" Scoop Cleat - PVC Cleat
Fabrication SC3-3 SC3-3 3" Scoop Cleat - PVC Cleat
Fabrication TC05-3 TC05-3 1/2" Tee Cleat - PVC Cleat
Fabrication TC1-3 TC1-3 1" Tee Cleat - PVC Cleat
Fabrication TC105-3 TC105-3 1-1/2" Tee Cleat - PVC Cleat
Fabrication TC2-3 TC2-3 2" Tee Cleat - PVC Cleat
Fabrication TC205-3 TC205-3 2-1/2" Tee Cleat - PVC Cleat
Fabrication TC3-3 TC3-3 3" Tee Cleat - PVC Cleat
Fabrication TC4-3 TC4-3 4" Tee Cleat - PVC Cleat
Download Spec Page

Part Number: 3-1502

Description: P2G Mono-Ruff-H 8M/HP/BP
Color : Green
Plies: 2
Nominal OAG: 0.265″
 +/- 0.02″
 Recessed OAG: 0.08″
Fabric: Monofilament
Top Surface: Hemp Impression Rough Top
Bottom Surface: Bare
Compound: PVC
Chemical Resistance Chart
Work Tension: 100 lbs./PIW
Elongation: Less than 2%
Weight: 0.071 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 3″
Back Flex Min. Pulley Diameter: 4.5″
Profile Min. Pulley Diameter Chart
Working Temperature (F): 20 to 180
Stock Width: 72″
Attributes: Cross Rigid, Anti-Static, Sliderbed Suitable
MinPulleyChart: 0
3-1502 Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

3-1502 features a PVC compound with a Hemp Impression Top Cover. It offers excellent gripping for standard incline conveyors. The carcass is high strength and low stretch. This belt is anti-static. NOTE–The rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. P2G Mono-Ruff-H 8M/HP/BP will handle most all products including boxed, bagged or packaged goods. This belt is non-marking belt. It will lie flat due to the monofilament carcass.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com