Contact Us Today

Part #: 3-1514

Part Number: 3-1514

Description: P2G Rough Top – Sine
Color : Green
Plies: 2

Nominal OAG: 

0.22

 +/- 

0.01
Recessed OAG: 
0.16
Fabric: 
Monofiliment/Polyester

Top Surface: 

Sine Wave Rough Top Impression

Bottom Surface: 

Bare Surface
Compound: 
PVC
Work Tension: 
51

Elongation: 

Less than 2%

Weight: 

0.08

Minimum Pulley Diameter: 

2.4

Back Flex Min. Pulley Diameter: 

3.6

Working Temperature: 

-14 to 158

Max. Stocked Width: 

118.11
Attributes: Sliderbed Suitable, Cross Rigid
125_photo.jpg
1 of 3 3-1514 Close Up

Related Documents

Features: 

3-1514 offers an abrasion resistant rough top impression for conveying on inclines. This belt is anti-static. NOTE-The rough top impression must be recessed before lacing. 3-1514 has a distinctive rough top pattern in a sine wave configuration which is difficult to mistake. It is used in distribution centers, farming, furniture manufacturing, package handling, plastic manufacturing, synthetics/rubber and the wood industry.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication AC-6 AC-6 A Section Cleat - RAV Cleat
Fabrication AV-3 AV-3 A Section V-Guide - PVC V-Guide
Fabrication AV-4 AV-4 A Section V-Guide - Urethane V-Guide
Fabrication AVN-3 AVN-3 A Section V-Guide Notched - PVC V-Guide
Fabrication BV-3 BV-3 B Section V-Guide - PVC V-Guide
Fabrication BVN-3 BVN-3 B Section V-Guide Notched - PVC V-Guide
Fabrication CV-3 CV-3 C Section V-Guide - PVC V-Guide
Fabrication CVN-3 CVN-3 C Section V-Guide Notched - PVC V-Guide
Fabrication E-A E-A Endless - Lap Splice Endless
Fabrication E-E E-E Endless- Finger Splice Endless
No image HLA2 Alligator Laced Both Ends – Hidden Lace Lacing
No image HLC2 Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLCSU2 HLCSU2 Coated Steel Unibar Both Ends – Hidden Lace Lacing
No image HLS2 Staple Laced Both Ends – Hidden Lace Lacing
No image HLSS2 S/S Staple Laced Both Ends – Hidden Lace Lacing
No image HLSSA2 S/S Alligator Laced Both Ends – Hidden Lace Lacing
No image HLSSC2 S/S Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLSSU2 HLSSU2 S/S Unibar Both Ends – Hidden Lace Lacing
No image HP Hole Punch Hole Punch
Fabrication K6V-6 K6V-6 K6 Section V-Guide - RAV V-Guide
Fabrication K6VN-6 K6VN-6 K6 Section V-Guide Notched - RAV V-Guide
Fabrication K8V-3 K8V-3 K8 Section V-Guide - PVC V-Guide
Fabrication K8VN-3 K8VN-3 K8 Section V-Guide Notched - PVC V-Guide
Fabrication LONG - LW LONG - LW Longitudinal Splice - LW Longitudinal
Fabrication OV-3 OV-3 O Section V-Guide - PVC V-Guide
Fabrication OVN-3 OVN-3 O Section V-Guide Notched - PVC V-Guide
Fabrication P-9 P-9 9 Hole Bucket Punch (P-9) Hole Punch
No image PE-E Prepared Ends - Finger Splice Endless
No image PE-J Prepared Ends - Skived Splice Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RCSU1 Coated Steel Unibar One End – Recessed Lacing
No image RCSU2 Coated Steel Unibar Both Ends – Recessed Lacing
No image RP2 Plastic Rivet Laced Both Ends - Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication RSSC1 RSSC1 S/S Clipper Laced One End - Recessed Lacing
Fabrication RSSC2 RSSC2 S/S Clipper Laced Both Ends - Recessed Lacing
No image RSSU1 S/S Unibar One End – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication SL2 SL2 Spiral Laced Both Ends Lacing
Fabrication TC1-3 TC1-3 1" Tee Cleat - PVC Cleat
Download Spec Page

Part Number: 3-1514

Description: P2G Rough Top – Sine
Color : Green
Plies: 2
Nominal OAG: 0.22″
 +/- 0.01″
 Recessed OAG: 0.16″
Fabric: Monofiliment/Polyester
Top Surface: Sine Wave Rough Top Impression
Bottom Surface: Bare Surface
Compound: PVC
Chemical Resistance Chart
Work Tension: 51 lbs./PIW
Elongation: Less than 2%
Weight: 0.08 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 2.4″
Back Flex Min. Pulley Diameter: 3.6″
Profile Min. Pulley Diameter Chart
Working Temperature (F): -14 to 158
Stock Width: 118.11″
Attributes: Sliderbed Suitable, Cross Rigid
MinPulleyChart: 0
3-1514 Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

3-1514 offers an abrasion resistant rough top impression for conveying on inclines. This belt is anti-static. NOTE-The rough top impression must be recessed before lacing. 3-1514 has a distinctive rough top pattern in a sine wave configuration which is difficult to mistake. It is used in distribution centers, farming, furniture manufacturing, package handling, plastic manufacturing, synthetics/rubber and the wood industry.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com