3-1517 – Mulhern Belting

Contact Us Today

Part #: 3-1517

Part Number: 3-1517

Description:

R1700 PVC Rough Top-HI

Color:

Red

Plies:

Nominal OAG:

0.34

+/-

0.01

Recessed OAG:

0.165

Fabric:

Interwoven Polyester

Top Surface:

Rough Top Impression

Bottom Surface:

Brushed

Compound:

PVC

Work Tension:

170

Elongation:

Less than 2%

Weight:

0.117

Minimum Pulley Diameter:

Back Flex Min. Pulley Diameter:

Working Temperature:

0 to 180

Max. Stocked Width:

Top Cover Coefficient of Friction/Steel:

1.3

Bottom Cover Coefficient of Friction/Steel:

0.3

1 of 3

3-1517 Close Up

Features:

3-1517 utilizes a durable interwoven PVC carcass paired with a traditional hemp-impression rough-top cover for reliable gripping on incline conveyors. The brushed low-friction bottom surface reduces drag on slider beds, improving energy efficiency and extending belt life. The compound also provides limited oil resistance, making it suitable for mildly oily environments.

This construction is commonly used for conveying luggage, corrugated cartons, boxed goods, plastics, paper products, wood, and lumber—particularly where a moderate incline and consistent product control are required.

(Note: Rough-top impressions must be recessed for mechanical lacing. Use Recessed OAG for lacing recommendation.)

Image	Fabrication	Description	Fabrication Type
	AV-3	A Section V-Guide - PVC	V-Guide
	AVN-3	A Section V-Guide Notched - PVC	V-Guide
	BC-3	B Section Cleat - PVC	Cleat
	BC2-3	2" Beefy Cleat - PVC	Cleat
	BV-3	B Section V-Guide - PVC	V-Guide
	BVN-3	B Section V-Guide Notched - PVC	V-Guide
	CV-3	C Section V-Guide - PVC	V-Guide
	CVN-3	C Section V-Guide Notched - PVC	V-Guide
	E-H	Endless - Finger Splice Interwoven 2	Endless
No image	HLA2	Alligator Laced Both Ends – Hidden Lace	Lacing
No image	HLC2	Clipper Laced Both Ends – Hidden Lace	Lacing
	HLCSU2	Coated Steel Unibar Both Ends – Hidden Lace	Lacing
No image	HLSSC2	S/S Clipper Laced Both Ends – Hidden Lace	Lacing
	HLSSU2	S/S Unibar Both Ends – Hidden Lace	Lacing
No image	HP	Hole Punch	Hole Punch
	K6V-3	K6 Section V-Guide - PVC	V-Guide
	K6VN-3	K6 Section V-Guide Notched - PVC	V-Guide
	K8V-3	K8 Section V-Guide - PVC	V-Guide
	K8VN-3	K8 Section V-Guide Notched - PVC	V-Guide
	LONG - IW	Longitudinal Splice - IW	Longitudinal
	OV-3	O Section V-Guide - PVC	V-Guide
	OVN-3	O Section V-Guide Notched - PVC	V-Guide
No image	PE-H	Prepared Ends – Interwoven Finger Splice 2	Endless
	Perforation	Perforation	Hole Punch
No image	RA1	Alligator Laced One End – Recessed	Lacing
No image	RA2	Alligator Laced Both Ends – Recessed	Lacing
	RC1	Clipper Laced One End - Recessed	Lacing
	RC2	Clipper Laced Both Ends - Recessed	Lacing
No image	RCSU1	Coated Steel Unibar One End – Recessed	Lacing
No image	RCSU2	Coated Steel Unibar Both Ends – Recessed	Lacing
No image	RFR2	Flexco Rivet Laced Both Ends – Recessed	Lacing
No image	RMS1	Megalloy Staple Laced One End – Recessed	Lacing
No image	RMS2	Megalloy Staple Laced Both Ends – Recessed	Lacing
	RS1	Staple Laced One End – Recessed	Lacing
	RS2	Staple Laced Both Ends – Recessed	Lacing
	RSS1	S/S Staple Laced One End – Recessed	Lacing
No image	RSS2	S/S Staple Laced Both Ends – Recessed	Lacing
No image	RSSA1	S/S Alligator Laced One End – Recessed	Lacing
No image	RSSA2	S/S Alligator Laced Both Ends – Recessed	Lacing
	RSSC1	S/S Clipper Laced One End - Recessed	Lacing
	RSSC2	S/S Clipper Laced Both Ends - Recessed	Lacing
No image	RSSU1	S/S Unibar One End – Recessed	Lacing
No image	RSSU2	S/S Unibar Both Ends – Recessed	Lacing
	TC3-3	3" Tee Cleat - PVC	Cleat

Contact Us Today

Part #: 3-1517

Part Number: 3-1517

Related Documents

Related Documents

Fabrications for Belt Specification