Part #: 3-1600

Part Number: 3-1600

Description: P2GY Mono-Grip-S 8M/7P/ZP
Color : Gray
Plies: 2
Nominal OAG: 0.145″
 +/- 0.03″
Fabric: Monofilament
Top Surface: Low Durometer PVC
Bottom Surface: Bare
Compound: PVC
Work Tension: 100 lbs./PIW
Elongation: Less than 2%
Weight: 0.072 lbs./PIW
Minimum Pulley Diameter: 2″
Back Flex Min. Pulley Diameter: 3″
Working Temperature (F): 20 to 180
Attributes: Cross Rigid, Powerturn Suitable, Non-Marking, Sliderbed Suitable
Features: 

3-1600 features a low durometer PVC top cover on a 2 ply monofilament carcass. This belt will provide a positive (sticky) carrying surface. The carcass will permit this belt to travel at high speeds with low noise. It is also known as a ‘Sticky Top’ belt. P2GY Mono-Grip-S 8M/7P/ZP can be used in package handling, manufacturing, post office applications. It is a high traction belt for moderate inclines.

Gallery

Part Number: 3-1600

Description: P2GY Mono-Grip-S 8M/7P/ZP
Color : Gray
Plies: 2
Nominal OAG: 0.145″
 +/- 0.03″
Fabric: Monofilament
Top Surface: Low Durometer PVC
Bottom Surface: Bare
Compound: PVC
Work Tension: 100 lbs./PIW
Elongation: Less than 2%
Weight: 0.072 lbs./PIW
Minimum Pulley Diameter: 2″
Back Flex Min. Pulley Diameter: 3″
Working Temperature (F): 20 to 180
Attributes: Cross Rigid, Powerturn Suitable, Non-Marking, Sliderbed Suitable
Features: 

3-1600 features a low durometer PVC top cover on a 2 ply monofilament carcass. This belt will provide a positive (sticky) carrying surface. The carcass will permit this belt to travel at high speeds with low noise. It is also known as a ‘Sticky Top’ belt. P2GY Mono-Grip-S 8M/7P/ZP can be used in package handling, manufacturing, post office applications. It is a high traction belt for moderate inclines.

Gallery