Contact Us Today

Part #: 3-4102

Part Number: 3-4102

Description: 2 Ply Black Diamond Top
Color : Black
Plies: 2

Nominal OAG: 

0.33

 +/- 

0.02
Recessed OAG: 
0.15
Fabric: 
Polyester

Top Surface: 

Diamond Top Impression

Bottom Surface: 

Bare
Compound: 
SBR
Work Tension: 
120

Elongation: 

Less than 3%

Weight: 

0.093

Minimum Pulley Diameter: 

2.5

Back Flex Min. Pulley Diameter: 

3.75

Working Temperature: 

-20 to 250

Max. Stocked Width: 

72

Hardness: 

45a

Top Cover Coefficient of Friction/Steel: 

1.9

Bottom Cover Coefficient of Friction/Steel: 

0.3
Attributes: Sliderbed Suitable
30_photo.jpg 30_photo1.jpg
1 of 3 3-4102 Close Up

Related Documents

Features: 

3-4102 is used for the steepest inclines where high performance is needed. The belt offers an unusually high coefficient of friction. NOTE–The rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 2 Ply Black Diamond Top is used in boxed, bagged and packaged goods applications. It is also populare in the airline industry and in post offices.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication BC2-2 BC2-2 2" Beefy Cleat - SBR Cleat
Fabrication BVN-2 BVN-2 B Section V-Guide Notched - SBR V-Guide
Fabrication CFC2 CFC2 Clipper Laced Both Ends – Cover Flap Lacing
Fabrication CFCSU2 CFCSU2 Coated Steel Unibar Both Ends – Cover Flap Lacing
Fabrication CFSSA2 CFSSA2 S/S Alligator Laced Both Ends – Cover Flap Lacing
Fabrication CFSSC2 CFSSC2 S/S Clipper Laced Both Ends – Cover Flap Lacing
Fabrication CFSSU2 CFSSU2 S/S Unibar Both Ends – Cover Flap Lacing
Fabrication E-A E-A Endless - Lap Splice Endless
No image HLC2 Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLCSU2 HLCSU2 Coated Steel Unibar Both Ends – Hidden Lace Lacing
No image HP Hole Punch Hole Punch
Fabrication LONG - LW LONG - LW Longitudinal Splice - LW Longitudinal
Fabrication LUG0505-2 LUG0505-2 1/2" x 1/2" Lug - SBR Cleat
Fabrication LUG11-2 LUG11-2 1" x 1" Lug - SBR Cleat
No image PE-A Prepared Ends - Lap Splice Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RCSU1 Coated Steel Unibar One End – Recessed Lacing
No image RCSU2 Coated Steel Unibar Both Ends – Recessed Lacing
No image RFH1 Flexco Hinge Laced One End - Recessed Lacing
No image RFH2 Flexco Hinge Laced Both Ends - Recessed Lacing
No image RFR2 Flexco Rivet Laced Both Ends – Recessed Lacing
No image RMS1 Megalloy Staple Laced One End – Recessed Lacing
No image RMS2 Megalloy Staple Laced Both Ends – Recessed Lacing
No image RP1 Plastic Rivet Laced One End - Recessed Lacing
No image RP2 Plastic Rivet Laced Both Ends - Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
No image RSFR1 S/S Flexco Rivet Laced One End – Recessed Lacing
No image RSFR2 S/S Flexco Rivet Laced Both Ends – Recessed Lacing
No image RSL2 Spiral Laced Both Ends - R Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication RSSC1 RSSC1 S/S Clipper Laced One End - Recessed Lacing
Fabrication RSSC2 RSSC2 S/S Clipper Laced Both Ends - Recessed Lacing
No image RSSU1 S/S Unibar One End – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication SI220 SI220 2" High Sidewall - SBR Sidewall
Fabrication TC105-2 TC105-2 1-1/2" Tee Cleat - SBR Cleat
Fabrication TC2-2 TC2-2 2" Tee Cleat - SBR Cleat
Download Spec Page

Part Number: 3-4102

Description: 2 Ply Black Diamond Top
Color : Black
Plies: 2
Nominal OAG: 0.33″
 +/- 0.02″
 Recessed OAG: 0.15″
Fabric: Polyester
Top Surface: Diamond Top Impression
Bottom Surface: Bare
Compound: SBR
Chemical Resistance Chart
Work Tension: 120 lbs./PIW
Elongation: Less than 3%
Weight: 0.093 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 2.5″
Back Flex Min. Pulley Diameter: 3.75″
Profile Min. Pulley Diameter Chart
Working Temperature (F): -20 to 250
Stock Width: 72″
Attributes: Sliderbed Suitable
Hardness: 45a
Top Cover Coefficient of Friction: 1.9
Bottom Cover Coefficient of Friction: 0.3
MinPulleyChart: 0
3-4102 Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

3-4102 is used for the steepest inclines where high performance is needed. The belt offers an unusually high coefficient of friction. NOTE–The rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 2 Ply Black Diamond Top is used in boxed, bagged and packaged goods applications. It is also populare in the airline industry and in post offices.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com