Part #: 3-4402G

Part Number: 3-4402G

Description: 2 Ply Tan Gum Diamond Top
Color : Tan
Plies: 2
Nominal OAG: 0.313″
 +/- 0.02″
 Recessed OAG: 0.15″
Fabric: Polyester
Top Surface: Diamond Top Impression
Bottom Surface: Bare
Compound: SBR
Work Tension: 150 lbs./PIW
Elongation: Less than 2%
Weight: 0.103 lbs./PIW
Minimum Pulley Diameter: 2.5″
Working Temperature (F): -25 to 250
Attributes: Sliderbed Suitable, Non-Marking
Top Cover Coefficient of Friction/Steel: 1.9
Bottom Cover Coefficient of Friction/Steel: 0.3
Features: 

3-4402G is normally used for the most demanding steep inclines where high performance is needed. This belt has an unusually high coefficient of friction due to the gum rubber. NOTE–the rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 2 Ply Tan Gum Diamond Top is used for boxed, bagged and packaged goods applications. This belt is also popular in the airline industry and in the post office. This belt is also non-marking.

Gallery

Part Number: 3-4402G

Description: 2 Ply Tan Gum Diamond Top
Color : Tan
Plies: 2
Nominal OAG: 0.313″
 +/- 0.02″
 Recessed OAG: 0.15″
Fabric: Polyester
Top Surface: Diamond Top Impression
Bottom Surface: Bare
Compound: SBR
Work Tension: 150 lbs./PIW
Elongation: Less than 2%
Weight: 0.103 lbs./PIW
Minimum Pulley Diameter: 2.5″
Working Temperature (F): -25 to 250
Attributes: Sliderbed Suitable, Non-Marking
Top Cover Coefficient of Friction: 1.9
Bottom Cover Coefficient of Friction: 0.3
Features: 

3-4402G is normally used for the most demanding steep inclines where high performance is needed. This belt has an unusually high coefficient of friction due to the gum rubber. NOTE–the rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 2 Ply Tan Gum Diamond Top is used for boxed, bagged and packaged goods applications. This belt is also popular in the airline industry and in the post office. This belt is also non-marking.

Gallery