Contact Us Today

Part #: 3-5900

Part Number: 3-5900

Description: P2GY Mono-Grip-S 5M/SP/ZP
Color : Gray
Plies: 2

Nominal OAG: 

0.09

 +/- 

0.015
Fabric: 
Monofilament

Top Surface: 

Snakeskin

Bottom Surface: 

Bare
Compound: 
PVC
Work Tension: 
100

Elongation: 

Less than 2%

Weight: 

0.04

Minimum Pulley Diameter: 

2

Back Flex Min. Pulley Diameter: 

3

Working Temperature: 

20 to 180

Max. Stocked Width: 

78.75
Attributes: Sliderbed Suitable, Cross Rigid
60_photo.jpg 60_photo1.jpg
1 of 3 3-5900 Close Up

Related Documents

Features: 

3-5900 features a low durometer PVC compound with a snakeskin impression on a 2 ply monofilament carcass. This belt will provide a positive (sticky) carrying surface. The carcass will permit this belt to travel at high speeds with low noise. P2GY Mono-Grip-S 5M/SP/ZP can be used in package handling, manufacturing, post office applications. It is a high traction belt for moderate inclines.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication A1 A1 Alligator Laced One End Lacing
Fabrication A2 A2 Alligator Laced Both Ends Lacing
Fabrication AV-3 AV-3 A Section V-Guide - PVC V-Guide
Fabrication AVN-3 AVN-3 A Section V-Guide Notched - PVC V-Guide
Fabrication BC-3 BC-3 B Section Cleat - PVC Cleat
Fabrication BV-3 BV-3 B Section V-Guide - PVC V-Guide
Fabrication BVN-3 BVN-3 B Section V-Guide Notched - PVC V-Guide
Fabrication C1 C1 Clipper Laced One End Lacing
Fabrication C2 C2 Clipper Laced Both Ends Lacing
Fabrication CSU1 CSU1 Coated Steel Unibar One End Lacing
Fabrication CSU2 CSU2 Coated Steel Unibar Both Ends Lacing
Fabrication CV-3 CV-3 C Section V-Guide - PVC V-Guide
Fabrication CVN-3 CVN-3 C Section V-Guide Notched - PVC V-Guide
Fabrication E-E E-E Endless- Finger Splice Endless
No image HP Hole Punch Hole Punch
Fabrication K6V-3 K6V-3 K6 Section V-Guide - PVC V-Guide
Fabrication K6VN-3 K6VN-3 K6 Section V-Guide Notched - PVC V-Guide
Fabrication LONG - LW LONG - LW Longitudinal Splice - LW Longitudinal
Fabrication OC-3 OC-3 O Section Cleat - PVC Cleat
Fabrication OV-3 OV-3 O Section V-Guide - PVC V-Guide
Fabrication OVN-3 OVN-3 O Section V-Guide Notched - PVC V-Guide
Fabrication P1 P1 Plastic Rivet Laced One End Lacing
Fabrication P2 P2 Plastic Rivet Laced Both Ends Lacing
No image PE-F Prepared Ends -Finger Splice Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RCSU1 Coated Steel Unibar One End – Recessed Lacing
No image RCSU2 Coated Steel Unibar Both Ends – Recessed Lacing
No image RMS1 Megalloy Staple Laced One End – Recessed Lacing
No image RMS2 Megalloy Staple Laced Both Ends – Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication RSSC1 RSSC1 S/S Clipper Laced One End - Recessed Lacing
Fabrication RSSC2 RSSC2 S/S Clipper Laced Both Ends - Recessed Lacing
No image RSSU1 S/S Unibar One End – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication S1 S1 Staple Laced One End Lacing
Fabrication S2 S2 Staple Laced Both Ends Lacing
Fabrication SL2 SL2 Spiral Laced Both Ends Lacing
Fabrication SS1 SS1 S/S Staple Laced One End Lacing
Fabrication SS2 SS2 S/S Staple Laced Both Ends Lacing
Fabrication SSA1 SSA1 S/S Alligator Laced One End Lacing
Fabrication SSA2 SSA2 S/S Alligator Laced Both Ends Lacing
Fabrication SSC1 SSC1 S/S Clipper Laced One End Lacing
Fabrication SSC2 SSC2 S/S Clipper Laced Both Ends Lacing
Fabrication SSU1 SSU1 S/S Unibar One End Lacing
Fabrication SSU2 SSU2 S/S Unibar Both Ends Lacing
Download Spec Page

Part Number: 3-5900

Description: P2GY Mono-Grip-S 5M/SP/ZP
Color : Gray
Plies: 2
Nominal OAG: 0.09″
 +/- 0.015″
Fabric: Monofilament
Top Surface: Snakeskin
Bottom Surface: Bare
Compound: PVC
Chemical Resistance Chart
Work Tension: 100 lbs./PIW
Elongation: Less than 2%
Weight: 0.04 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 2″
Back Flex Min. Pulley Diameter: 3″
Profile Min. Pulley Diameter Chart
Working Temperature (F): 20 to 180
Stock Width: 78.75″
Attributes: Sliderbed Suitable, Cross Rigid
MinPulleyChart: 0
3-5900 Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

3-5900 features a low durometer PVC compound with a snakeskin impression on a 2 ply monofilament carcass. This belt will provide a positive (sticky) carrying surface. The carcass will permit this belt to travel at high speeds with low noise. P2GY Mono-Grip-S 5M/SP/ZP can be used in package handling, manufacturing, post office applications. It is a high traction belt for moderate inclines.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com