Contact Us Today

Part #: 4-4004

Part Number: 4-4004

Description: 4 Ply Slider Top
Color : Tan
Plies: 4

Nominal OAG: 

0.12

 +/- 

0.02
Fabric: 
Cotton/Polyester

Top Surface: 

Bare Nylon

Bottom Surface: 

Friction Surface
Compound: 
NBR
Work Tension: 
50

Elongation: 

Less than 2%

Weight: 

0.069

Minimum Pulley Diameter: 

2

Back Flex Min. Pulley Diameter: 

3

Working Temperature: 

0 to 250

Max. Stocked Width: 

72

Top Cover Coefficient of Friction/Steel: 

0.3

Bottom Cover Coefficient of Friction/Steel: 

0.5
705_photo.jpg
1 of 1 705_photo.jpg

Related Documents

Features: 

This belt offers a hard abrasion resistant nylon top surface that is almost frictionless. The belt was designed for automated machinery where the product must accumulate or stay stationary as the belt moves. 4 Ply Slider Top is used in many packaging and diverting operations where the product must slide on the belt while the belt is moving.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication A1 A1 Alligator Laced One End Lacing
Fabrication A2 A2 Alligator Laced Both Ends Lacing
Fabrication AC-1 AC-1 A Section Cleat - Nitrile Cleat
Fabrication AVN-2 AVN-2 A Section V-Guide Notched - SBR V-Guide
Fabrication BC-1 BC-1 B Section Cleat - Nitrile Cleat
No image BC2-1 2" Beefy Cleat - Nitrile Cleat
Fabrication BC3-2 BC3-2 3" Beefy Cleat - SBR Cleat
Fabrication BV-1 BV-1 B Section V-Guide - Nitrile V-Guide
Fabrication BVN-1 BVN-1 B Section V-Guide Notched - Nitrile V-Guide
Fabrication BVN-2 BVN-2 B Section V-Guide Notched - SBR V-Guide
Fabrication C1 C1 Clipper Laced One End Lacing
Fabrication C2 C2 Clipper Laced Both Ends Lacing
Fabrication CC-1 CC-1 C Section Cleat - Nitrile Cleat
Fabrication CFA2 CFA2 Alligator Laced Both Ends – Cover Flap Lacing
Fabrication CFC2 CFC2 Clipper Laced Both Ends – Cover Flap Lacing
Fabrication CFCSU2 CFCSU2 Coated Steel Unibar Both Ends – Cover Flap Lacing
No image CFMFR2 Megalloy Flexco Rivet Laced Both Ends – Cover Flap Lacing
No image CFMS2 Megalloy Staple Laced Both Ends – Cover Flap Lacing
No image CFRP2 Plastic Rivet Laced Both Ends – Cover Flap Lacing
Fabrication CFS2 CFS2 Staple Laced Both Ends – Cover Flap Lacing
Fabrication CFSS2 CFSS2 S/S Staple Laced Both Ends – Cover Flap Lacing
Fabrication CFSSA2 CFSSA2 S/S Alligator Laced Both Ends – Cover Flap Lacing
Fabrication CFSSC2 CFSSC2 S/S Clipper Laced Both Ends – Cover Flap Lacing
Fabrication CFSSU2 CFSSU2 S/S Unibar Both Ends – Cover Flap Lacing
Fabrication CSU1 CSU1 Coated Steel Unibar One End Lacing
Fabrication CSU2 CSU2 Coated Steel Unibar Both Ends Lacing
Fabrication CVN-1 CVN-1 C Section V-Guide Notched - Nitrile V-Guide
Fabrication DV-1 DV-1 D Section V-Guide - Nitrile V-Guide
Fabrication DVN-1 DVN-1 D Section V-Guide Notched - Nitrile V-Guide
Fabrication E-A E-A Endless - Lap Splice Endless
Fabrication FLG05-1 FLG05-1 1/2" High Flange Flange
Fabrication FLG05S-1 FLG05S-1 1/2" High Siped Flange - White Nitrile Flange
Fabrication FLG1-1 FLG1-1 1" High Flange -- Flange
Fabrication FLG105-1 FLG105-1 1-1/2" High Flange Flange
Fabrication FLG105S-1 FLG105S-1 1-1/2" High Siped Flange - White Nitrile Flange
Fabrication FLG1S-1 FLG1S-1 1" High Siped Flange - Nitrile Flange
No image FSL2 Finger Spiral Laced Both Ends Lacing
No image HLA2 Alligator Laced Both Ends – Hidden Lace Lacing
No image HLC2 Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLCSU2 HLCSU2 Coated Steel Unibar Both Ends – Hidden Lace Lacing
No image HLS2 Staple Laced Both Ends – Hidden Lace Lacing
No image HLSS2 S/S Staple Laced Both Ends – Hidden Lace Lacing
No image HLSSA2 S/S Alligator Laced Both Ends – Hidden Lace Lacing
No image HLSSC2 S/S Clipper Laced Both Ends – Hidden Lace Lacing
Fabrication HLSSU2 HLSSU2 S/S Unibar Both Ends – Hidden Lace Lacing
No image HP Hole Punch Hole Punch
Fabrication LONG - LW LONG - LW Longitudinal Splice - LW Longitudinal
Fabrication LUG0505-1 LUG0505-1 1/2" x 1/2" Lug - Nitrile Cleat
Fabrication LUG11-1 LUG11-1 1" x 1" Lug - White Nitrile Cleat
No image MS1 Megalloy Staple Laced One End Lacing
No image MS2 Megalloy Staple Laced Both Ends Lacing
Fabrication P-1 P-1 2 Hole Bucket Punch (P-1) Hole Punch
Fabrication P1 P1 Plastic Rivet Laced One End Lacing
No image PE-A Prepared Ends - Lap Splice Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RA2 Alligator Laced Both Ends – Recessed Lacing
Fabrication RC1 RC1 Clipper Laced One End - Recessed Lacing
Fabrication RC2 RC2 Clipper Laced Both Ends - Recessed Lacing
No image RCSU1 Coated Steel Unibar One End – Recessed Lacing
No image RCSU2 Coated Steel Unibar Both Ends – Recessed Lacing
Fabrication RS1 RS1 Staple Laced One End – Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
No image RSL2 Spiral Laced Both Ends - R Lacing
Fabrication RSS1 RSS1 S/S Staple Laced One End – Recessed Lacing
No image RSS2 S/S Staple Laced Both Ends – Recessed Lacing
No image RSSU2 S/S Unibar Both Ends – Recessed Lacing
Fabrication S1 S1 Staple Laced One End Lacing
Fabrication S2 S2 Staple Laced Both Ends Lacing
Fabrication SC2-1 SC2-1 2" Scoop Cleat - White Nitrile Cleat
Fabrication SC3-1 SC3-1 3" Scoop Cleat - White Nitrile Cleat
Fabrication SC4-1 SC4-1 4" Scoop Cleat - White Nitrile Cleat
Fabrication SL2 SL2 Spiral Laced Both Ends Lacing
Fabrication SM1020-1 SM1020-1 1" x 2" Scrap Metal Lug - White Nitrile Cleat
Fabrication SS1 SS1 S/S Staple Laced One End Lacing
Fabrication SS2 SS2 S/S Staple Laced Both Ends Lacing
Fabrication SSA1 SSA1 S/S Alligator Laced One End Lacing
Fabrication SSA2 SSA2 S/S Alligator Laced Both Ends Lacing
Fabrication SSC1 SSC1 S/S Clipper Laced One End Lacing
Fabrication SSC2 SSC2 S/S Clipper Laced Both Ends Lacing
Fabrication SSU1 SSU1 S/S Unibar One End Lacing
Fabrication SSU2 SSU2 S/S Unibar Both Ends Lacing
Fabrication TC1-1 TC1-1 1" Tee Cleat - Nitrile Cleat
Fabrication TC105-1 TC105-1 1-1/2" Tee Cleat - Nitrile Cleat
Fabrication TC105-2 TC105-2 1-1/2" Tee Cleat - SBR Cleat
Fabrication TC2-1 TC2-1 2" Tee Cleat - Nitrile Cleat
Fabrication TC3-1 TC3-1 3" Tee Cleat - Nitrile Cleat
Fabrication TC4-1 TC4-1 4" Tee Cleat - Nitrile Cleat
Download Spec Page

Part Number: 4-4004

Description: 4 Ply Slider Top
Color : Tan
Plies: 4
Nominal OAG: 0.12″
 +/- 0.02″
Fabric: Cotton/Polyester
Top Surface: Bare Nylon
Bottom Surface: Friction Surface
Compound: NBR
Chemical Resistance Chart
Work Tension: 50 lbs./PIW
Elongation: Less than 2%
Weight: 0.069 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 2″
Back Flex Min. Pulley Diameter: 3″
Profile Min. Pulley Diameter Chart
Working Temperature (F): 0 to 250
Stock Width: 72″
Top Cover Coefficient of Friction: 0.3
Bottom Cover Coefficient of Friction: 0.5
MinPulleyChart: 0
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

This belt offers a hard abrasion resistant nylon top surface that is almost frictionless. The belt was designed for automated machinery where the product must accumulate or stay stationary as the belt moves. 4 Ply Slider Top is used in many packaging and diverting operations where the product must slide on the belt while the belt is moving.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com