Contact Us Today

Part #: 5-2733-MHT

Part Number: 5-2733-MHT

Description: 2 Ply 220 3/16 x 1/16 Maximum HT
Color : Black
Plies: 2

Nominal OAG: 

0.36

 +/- 

0.03
Fabric: 
Polyester/Nylon

Top Surface: 

Smooth Cover
Top Cover Thickness: 
0.1875

Bottom Surface: 

Smooth Cover
Bottom Cover Thickness: 
0.0625
Compound: 
EPM
Work Tension: 
220

Elongation: 

Less than 4%

Weight: 

0.2

Working Temperature: 

-20 to 700

Max. Stocked Width: 

72

Hardness: 

65a
Attributes: Heat Resistant / High Temp
12_photo.jpg
1 of 1 12_photo.jpg

Related Documents

Minimum Pulley Chart
Tension RatingMin. Pulley Dia. (in)Min. Pulley Dia. (mm)
Over 80%16"406.4 mm
60%-80%14"355.6 mm
40%-60%12"304.8 mm
Below 40%, tails, snubs10"254 mm
Features: 

5-2733-MHT features a wide temperature range, with a high temperature approximately up to 400F (fines) and 700F (lumps). When used in it’s recommended service range it resists hardening and cracking. It is also highly ozone resistant.The product is also known as the 700 Degree belt. 220 3/16 x 1/16 Maximum High Temp is used in many high heat, high abrasion applications—such as a foundry.

Fabrications for Belt Specification

Image Fabrication Description Fabrication Type
Fabrication A1 A1 Alligator Laced One End Lacing
Fabrication AC-5 AC-5 A Section Cleat - HT Cleat
Fabrication B-1 B-1 2 Hole Bucket Punch (B-1) Hole Punch
Fabrication B-2 B-2 3 Hole Bucket Punch (B-2) Hole Punch
Fabrication B-3 B-3 4 Hole Bucket Punch (B-3) Hole Punch
Fabrication B-4 B-4 5 Hole Bucket Punch (B-4) Hole Punch
Fabrication B-5 B-5 6 Hole Bucket Punch (B-5) Hole Punch
Fabrication B-6 B-6 5 Hole Bucket Punch (B-6) Hole Punch
Fabrication B-7 B-7 7 Hole Bucket Punch (B-7) Hole Punch
Fabrication BC-5 BC-5 B Section Cleat - HT Cleat
Fabrication CC-5 CC-5 C Section Cleat - HT Cleat
No image CFFH2 Flexco Hinge Laced Both Ends – Cover Flap Lacing
No image CFFR2 Flexco Rivet Laced Both Ends – Cover Flap Lacing
Fabrication CFS2 CFS2 Staple Laced Both Ends – Cover Flap Lacing
No image CFSFH2 S/S Flexco Hinge Laced Both Ends – Cover Flap Lacing
Fabrication CVN-1 CVN-1 C Section V-Guide Notched - Nitrile V-Guide
Fabrication CVN-2 CVN-2 C Section V-Guide Notched - SBR V-Guide
Fabrication E-N E-N Endless - 2 Ply HT Endless
Fabrication FH1 FH1 Flexco Hinge Laced One End Lacing
Fabrication FH2 FH2 Flexco Hinge Laced Both Ends Lacing
No image FP3 Flexco Plate Prepared (Lacing Included) Lacing
No image FP3NL Flexco Plate Prepared (No Lacing Included) Lacing
No image FR1 Flexco Rivet Laced One End Lacing
No image FR2 Flexco Rivet Laced Both Ends Lacing
No image HLS2 Staple Laced Both Ends – Hidden Lace Lacing
No image HP Hole Punch Hole Punch
Fabrication LUG0505-2 LUG0505-2 1/2" x 1/2" Lug - SBR Cleat
No image MFH1 Megalloy Flexco Hinge Laced One End Lacing
No image MFH2 Megalloy Flexco Hinge Laced Both Ends Lacing
No image MFR1 Megalloy Flexco Rivet Laced One End Lacing
No image MFR2 Megalloy Flexco Rivet Laced Both Ends Lacing
Fabrication P-1 P-1 2 Hole Bucket Punch (P-1) Hole Punch
Fabrication P-2 P-2 3 Hole Bucket Punch (P-2) Hole Punch
Fabrication P-3 P-3 4 Hole Bucket Punch (P-3) Hole Punch
Fabrication P-4 P-4 5 Hole Bucket Punch (P-4) Hole Punch
Fabrication P-5 P-5 6 Hole Bucket Punch (P-5) Hole Punch
Fabrication P-7 P-7 5 Hole Bucket Punch (P-7) Hole Punch
Fabrication P-8 P-8 7 Hole Bucket Punch (P-8) Hole Punch
Fabrication P-9 P-9 9 Hole Bucket Punch (P-9) Hole Punch
No image PE-N Prepared Ends - 2 Ply HT Endless
Fabrication Perforation Perforation Perforation Hole Punch
No image RA1 Alligator Laced One End – Recessed Lacing
No image RFH1 Flexco Hinge Laced One End - Recessed Lacing
No image RFH2 Flexco Hinge Laced Both Ends - Recessed Lacing
No image RFP3 Flexco Plate Prepared (Lacing Included) - Recessed Lacing
No image RFP3NL Flexco Plate Prepared (No Lacing Included) - Recessed Lacing
No image RFR1 Flexco Rivet Laced One End - Recessed Lacing
No image RFR2 Flexco Rivet Laced Both Ends – Recessed Lacing
No image RMFH1 Megalloy Flexco Hinge Laced One End - Recessed Lacing
No image RMFH2 Megalloy Flexco Hinge Laced Both Ends – Recessed Lacing
No image RMFR1 Megalloy Flexco Rivet Laced One End – Recessed Lacing
No image RMFR2 Megalloy Flexco Rivet Laced Both Ends - Recessed Lacing
Fabrication RS2 RS2 Staple Laced Both Ends – Recessed Lacing
No image RSFH1 S/S Flexco Hinge Laced One End – Recessed Lacing
No image RSFH2 S/S Flexco Hinge Laced Both Ends – Recessed Lacing
No image RSFP3 S/S Flexco Plate Prepared- (Lacing Included) - Recessed Lacing
No image RSFR1 S/S Flexco Rivet Laced One End – Recessed Lacing
No image RSFR2 S/S Flexco Rivet Laced Both Ends – Recessed Lacing
No image RSSA1 S/S Alligator Laced One End – Recessed Lacing
No image RSSA2 S/S Alligator Laced Both Ends – Recessed Lacing
Fabrication SC4-5 SC4-5 4" Scoop Cleat - HT Cleat
No image SFH1 S/S Flexco Hinge Laced One End Lacing
Fabrication SFH2 SFH2 S/S Flexco Hinge Laced Both Ends Lacing
No image SFP3 S/S Flexco Plate Prepared (Lacing Included) Lacing
No image SFR1 S/S Flexco Rivet Laced One End Lacing
No image SFR2 S/S Flexco Rivet Laced Both Ends Lacing
Fabrication SS63HTCBS-FI SS63HTCBS-FI Super Screw 63, HT, Gal. Steel, CBS Lacing
Fabrication SSA1 SSA1 S/S Alligator Laced One End Lacing
Fabrication SSA2 SSA2 S/S Alligator Laced Both Ends Lacing
Download Spec Page

Part Number: 5-2733-MHT

Description: 2 Ply 220 3/16 x 1/16 Maximum HT
Color : Black
Plies: 2
Nominal OAG: 0.36″
 +/- 0.03″
Fabric: Polyester/Nylon
Top Surface: Smooth Cover
Top Cover Thickness: 0.1875″
Bottom Surface: Smooth Cover
Bottom Cover Thickness: 0.0625″
Compound: EPM
Chemical Resistance Chart
Work Tension: 220 lbs./PIW
Elongation: Less than 4%
Weight: 0.2 lbs./PIW
Lacing Selection Chart
Minimum Pulley Diameter: 10″
Profile Min. Pulley Diameter Chart
Working Temperature (F): -20 to 700
Stock Width: 72″
Attributes: Heat Resistant / High Temp
Hardness: 65a
MinPulleyChart: 1
Minimum Pulley Chart:
Minimum Pulley Chart
5-2733-MHT Close Up
Duration: [00:30]
Belt Guts – Anatomy of a Belt
Duration: [04:24]
Cooking with High Temp Belt
Duration: [04:08]
Judging A Belt By Its Cover
Duration: [04:41]
Features: 

5-2733-MHT features a wide temperature range, with a high temperature approximately up to 400F (fines) and 700F (lumps). When used in it’s recommended service range it resists hardening and cracking. It is also highly ozone resistant.The product is also known as the 700 Degree belt. 220 3/16 x 1/16 Maximum High Temp is used in many high heat, high abrasion applications—such as a foundry.

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

QUICK LINKS

Copyright © 2025 by mulhernbelting..com

Our mission is to fully meet our customer’s needs by being the best provider, marketer and wholesaler of conveyor belting and related products.

Copyright © 2025 by mulhernbelting..com