5-7502 – Mulhern Belting

Contact Us Today

Part #: 5-7502

Part Number: 5-7502

Description:

2 Ply 220 1/8 X Bare Cleated Incline MOR

Color:

Black

Plies:

Nominal OAG:

0.45

+/-

0.03

Recessed OAG:

0.225

Fabric:

Polyester/Nylon

Top Surface:

1/4″ Chevron Profile

Top Cover Thickness:

0.125

Bottom Surface:

Bare

Compound:

MOR

Work Tension:

220

Elongation:

Less than 4%

Weight:

0.13

Working Temperature:

-20 to 225

Max. Stocked Width:

Attributes: Sliderbed Suitable, Troughable, Oil Resistant, Oil Resistance ASTM D471 70C/72hrs/IRM903 < 20% Swell

1 of 3

77_photo.jpg

Minimum Pulley Chart

Tension Rating	Min. Pulley Dia. (in)	Min. Pulley Dia. (mm)
Over 80%	16"	406.4 mm
60%-80%	14"	355.6 mm
40%-60%	12"	304.8 mm
Below 40%, tails, snubs	10"	254 mm

Features:

5-7502 features a 1/4″ tall, 6″ wide chevron profile in a staggered pattern for strong incline performance. Made in a medium-oil-resistant compound, this belt is widely used on Diamond Z grinders and in recycling operations where both abrasion and oil exposure are common.

Image	Fabrication	Description	Fabrication Type
	AC-7	A Section Cleat - MOR	Cleat
	BC-7	B Section Cleat - MOR	Cleat
	BV-2	B Section V-Guide - SBR	V-Guide
	BVN-2	B Section V-Guide Notched - SBR	V-Guide
	CC-7	C Section Cleat - MOR	Cleat
	CFC2	Clipper Laced Both Ends – Cover Flap	Lacing
	DV-7	D Section V-Guide - MOR	V-Guide
	DVN-7	D Section V-Guide Notched - MOR	V-Guide
	E-B	Endless - 2 Ply Lap	Endless
	FLG1-7	1" High Flange - MOR	Flange
	LONG - HW	Longitudinal Splice - HW	Longitudinal
No image	PE-B	Prepared Ends- 2 Ply Lap	Endless
No image	PE-O	Prepared Ends- 3 Ply HT	Endless
No image	RFH1	Flexco Hinge Laced One End - Recessed	Lacing
No image	RFH2	Flexco Hinge Laced Both Ends - Recessed	Lacing
No image	RFP3	Flexco Plate Prepared (Lacing Included) - Recessed	Lacing
No image	RFP3NL	Flexco Plate Prepared (No Lacing Included) - Recessed	Lacing
No image	RFR1	Flexco Rivet Laced One End - Recessed	Lacing
No image	RFR2	Flexco Rivet Laced Both Ends – Recessed	Lacing
No image	RMFH1	Megalloy Flexco Hinge Laced One End - Recessed	Lacing
No image	RMFH2	Megalloy Flexco Hinge Laced Both Ends – Recessed	Lacing
No image	RMFR1	Megalloy Flexco Rivet Laced One End – Recessed	Lacing
No image	RMFR2	Megalloy Flexco Rivet Laced Both Ends - Recessed	Lacing
No image	RMS1	Megalloy Staple Laced One End – Recessed	Lacing
No image	RMS2	Megalloy Staple Laced Both Ends – Recessed	Lacing
	RS1	Staple Laced One End – Recessed	Lacing
	RS2	Staple Laced Both Ends – Recessed	Lacing
No image	RSFH1	S/S Flexco Hinge Laced One End – Recessed	Lacing
No image	RSFH2	S/S Flexco Hinge Laced Both Ends – Recessed	Lacing
No image	RSFR1	S/S Flexco Rivet Laced One End – Recessed	Lacing
No image	RSFR2	S/S Flexco Rivet Laced Both Ends – Recessed	Lacing
	RSS1	S/S Staple Laced One End – Recessed	Lacing
No image	RSS2	S/S Staple Laced Both Ends – Recessed	Lacing
No image	RSSU2	S/S Unibar Both Ends – Recessed	Lacing
No image	SFR1	S/S Flexco Rivet Laced One End	Lacing
No image	SFR2	S/S Flexco Rivet Laced Both Ends	Lacing
	SIC305-7	3-1/2" SI Cleat - MOR	Cleat
	SS63MORCBS-FI	Super Screw 63, MOR, Gal. Steel, CBS	Lacing
	SS63SBRCBS-FI	Super Screw 63, SBR, Gal. Steel, CBS	Lacing
	TC1-7	1" Tee Cleat - MOR	Cleat
	TC105-7	1-1/2" Tee Cleat - MOR	Cleat
	TC2-7	2" Tee Cleat - MOR	Cleat

Contact Us Today

Part #: 5-7502

Part Number: 5-7502

Related Documents

Related Documents

Fabrications for Belt Specification