Part #: 5-8502

Part Number: 5-8502

Description: 3 Ply 330 1/8 x Bare Cleated Incline – MOR
Color : Black
Plies: 3

Nominal OAG: 

0.57

 +/- 

0.03
Recessed OAG: 
0.335
Fabric: 
Polyester/Nylon

Top Surface: 

1/4″ Chevron Profile
Top Cover Thickness: 
0.125

Bottom Surface: 

Bare
Compound: 
MOR
Work Tension: 
330

Elongation: 

Less than 4%

Weight: 

0.201

Working Temperature: 

-20 to 225

Max. Stocked Width: 

72
Attributes: Sliderbed Suitable, Troughable, Oil Resistant

Hardness: 

65a
Minimum Pulley Chart:
Tension RatingMin. Pulley Dia. (in)Min. Pulley Dia. (mm)
Over 80%18"457.2 mm
60%-80%16"406.4 mm
40%-60%14"355.6 mm
Below 40%, tails, snubs12"304.8 mm
Features: 

5-8502 features a 1/4″ high, 6″ wide chevron profile in a staggered pattern. The OAG includes the profile. Use the Recessed OAG for the Lacing Recommendation. 3 Ply 1/8″ x Bare Cleated Incline MOR is popular in bulk conveying where oil is a concern. This is a popular specification on Diamond Z grinders.

Gallery

Part Number: 5-8502

Description: 3 Ply 330 1/8 x Bare Cleated Incline – MOR
Color : Black
Plies: 3
Nominal OAG: 0.57″
 +/- 0.03″
 Recessed OAG: 0.335″
Fabric: Polyester/Nylon
Top Surface: 1/4″ Chevron Profile
Top Cover Thickness: 0.125″
Bottom Surface: Bare
Compound: MOR
Work Tension: 330 lbs./PIW
Elongation: Less than 4%
Weight: 0.201 lbs./PIW
Minimum Pulley Diameter: 12″
Working Temperature (F): -20 to 225
Stock Width: 72″
Attributes: Sliderbed Suitable, Troughable, Oil Resistant
Hardness: 65a
MinPulleyChart: 1
Minimum Pulley Chart:
Minimum Pulley Chart
Features: 

5-8502 features a 1/4″ high, 6″ wide chevron profile in a staggered pattern. The OAG includes the profile. Use the Recessed OAG for the Lacing Recommendation. 3 Ply 1/8″ x Bare Cleated Incline MOR is popular in bulk conveying where oil is a concern. This is a popular specification on Diamond Z grinders.

Gallery