Part #: 3-1406

Part Number: 3-1406

Description: 3 Ply Tan Rough Top x Bare
Color : Tan
Plies: 3
Nominal OAG: 0.265″
 +/- 0.025″
 Recessed OAG: 0.12″
Fabric: Polyester
Top Surface: Hemp Impression Rough Top
Bottom Surface: Bare
Compound: SBR
Work Tension: 200 lbs./PIW
Weight: 0.1 lbs./PIW
Minimum Pulley Diameter: 3″
Back Flex Min. Pulley Diameter: 4.5″
Working Temperature (F): -20 to 250
Attributes: Non-Marking, Troughable, Sliderbed Suitable
Top Cover Coefficient of Friction/Steel: 1.2
Bottom Cover Coefficient of Friction/Steel: 0.3
Features: 

3-1406 offers one of the highest coefficients of friction for steep inclines. This belt cushions the conveyed product with a non-marking surface. NOTE–The Rough Top impression must be recessed to use the recommended lacing. Use Recessed OAG for Lacing Recommendation. 3 Ply Tan Rough Top X Bare is popular where a little extra grip or non-marking quality is needed in an incline belt.

Gallery

Part Number: 3-1406

Description: 3 Ply Tan Rough Top x Bare
Color : Tan
Plies: 3
Nominal OAG: 0.265″
 +/- 0.025″
 Recessed OAG: 0.12″
Fabric: Polyester
Top Surface: Hemp Impression Rough Top
Bottom Surface: Bare
Compound: SBR
Work Tension: 200 lbs./PIW
Weight: 0.1 lbs./PIW
Minimum Pulley Diameter: 3″
Back Flex Min. Pulley Diameter: 4.5″
Working Temperature (F): -20 to 250
Attributes: Non-Marking, Troughable, Sliderbed Suitable
Top Cover Coefficient of Friction: 1.2
Bottom Cover Coefficient of Friction: 0.3
Features: 

3-1406 offers one of the highest coefficients of friction for steep inclines. This belt cushions the conveyed product with a non-marking surface. NOTE–The Rough Top impression must be recessed to use the recommended lacing. Use Recessed OAG for Lacing Recommendation. 3 Ply Tan Rough Top X Bare is popular where a little extra grip or non-marking quality is needed in an incline belt.

Gallery