Part #: 3-1407

Part Number: 3-1407

Description: 4 Ply Tan Gum R/T
Color : Tan
Plies: 4
Nominal OAG: 0.35″
 +/- 0.02″
 Recessed OAG: 0.175″
Fabric: Polyester
Top Surface: Hemp Impression Rough Top
Bottom Surface: Bare
Compound: NR
Work Tension: 200 lbs./PIW
Elongation: Less than 2%
Weight: 0.13 lbs./PIW
Minimum Pulley Diameter: 4″
Back Flex Min. Pulley Diameter: 6″
Working Temperature (F): -40 to 250
Attributes: Non-Marking, Troughable, Sliderbed Suitable
Top Cover Coefficient of Friction/Steel: 1.4
Bottom Cover Coefficient of Friction/Steel: 0.22
Features: 

3-1407 offers one of the highest co-efficients of friction for steep inclines. This belt cushions the conveyed product with a non-marking surface. NOTE–The rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 4 Ply Tan Rough Top X Bare is popular where a little extra grip or non-marking quality is needed in an incline belt.

Gallery

Part Number: 3-1407

Description: 4 Ply Tan Gum R/T
Color : Tan
Plies: 4
Nominal OAG: 0.35″
 +/- 0.02″
 Recessed OAG: 0.175″
Fabric: Polyester
Top Surface: Hemp Impression Rough Top
Bottom Surface: Bare
Compound: NR
Work Tension: 200 lbs./PIW
Elongation: Less than 2%
Weight: 0.13 lbs./PIW
Minimum Pulley Diameter: 4″
Back Flex Min. Pulley Diameter: 6″
Working Temperature (F): -40 to 250
Attributes: Non-Marking, Troughable, Sliderbed Suitable
Top Cover Coefficient of Friction: 1.4
Bottom Cover Coefficient of Friction: 0.22
MinPulleyChart: 0
Features: 

3-1407 offers one of the highest co-efficients of friction for steep inclines. This belt cushions the conveyed product with a non-marking surface. NOTE–The rough top impression must be recessed to use lacing. Use Recessed OAG for Lacing Recommendation. 4 Ply Tan Rough Top X Bare is popular where a little extra grip or non-marking quality is needed in an incline belt.

Gallery