4-1500 – Mulhern Belting

Contact Us Today

Part #: 4-1500

Part Number: 4-1500

Description:

3 Ply Red Supergrip x FS

Color:

Red

Plies:

Nominal OAG:

0.3

+/-

0.02

Recessed OAG:

0.188

Fabric:

Polyester

Top Surface:

1/8″ Natural Rubber Cover

Bottom Surface:

Bare

Compound:

Work Tension:

200

Elongation:

Less than 2%

Weight:

0.148

Minimum Pulley Diameter:

Back Flex Min. Pulley Diameter:

Working Temperature:

-20 to 250

Max. Stocked Width:

Top Cover Coefficient of Friction/Steel:

2.5

Bottom Cover Coefficient of Friction/Steel:

0.2

Attributes: Sliderbed Suitable

1 of 1

685_photo.jpg

Features:

Red Supergrip x FS features a soft, aggressively grippy rubber cover that provides one of the highest coefficients of friction in the industry. The rubber is molded to the carcass in an uncured state, creating a permanent bond that resists peeling and delamination even under demanding conditions.

This construction delivers exceptional pulling power on smooth materials and is widely used on corrugator folder-gluer machines. It is also suitable for applications requiring strong draw, controlled feeding, or high-friction contact where consistent traction is essential.

Image	Fabrication	Description	Fabrication Type
	CFA2	Alligator Laced Both Ends – Cover Flap	Lacing
	E-A	Endless - Lap Splice	Endless
No image	HLC2	Clipper Laced Both Ends – Hidden Lace	Lacing
	HLCSU2	Coated Steel Unibar Both Ends – Hidden Lace	Lacing
No image	HLS2	Staple Laced Both Ends – Hidden Lace	Lacing
No image	HLSS2	S/S Staple Laced Both Ends – Hidden Lace	Lacing
No image	HLSSA2	S/S Alligator Laced Both Ends – Hidden Lace	Lacing
No image	HLSSC2	S/S Clipper Laced Both Ends – Hidden Lace	Lacing
	HLSSU2	S/S Unibar Both Ends – Hidden Lace	Lacing
No image	HP	Hole Punch	Hole Punch
No image	PE-A	Prepared Ends - Lap Splice	Endless
	Perforation	Perforation	Hole Punch
No image	RA1	Alligator Laced One End – Recessed	Lacing
No image	RA2	Alligator Laced Both Ends – Recessed	Lacing
	RC1	Clipper Laced One End - Recessed	Lacing
	RC2	Clipper Laced Both Ends - Recessed	Lacing
No image	RCSU1	Coated Steel Unibar One End – Recessed	Lacing
No image	RCSU2	Coated Steel Unibar Both Ends – Recessed	Lacing
	RS1	Staple Laced One End – Recessed	Lacing
	RS2	Staple Laced Both Ends – Recessed	Lacing
	RSS1	S/S Staple Laced One End – Recessed	Lacing
No image	RSS2	S/S Staple Laced Both Ends – Recessed	Lacing
No image	RSSA1	S/S Alligator Laced One End – Recessed	Lacing
No image	RSSA2	S/S Alligator Laced Both Ends – Recessed	Lacing
	RSSC1	S/S Clipper Laced One End - Recessed	Lacing
	RSSC2	S/S Clipper Laced Both Ends - Recessed	Lacing
No image	RSSU1	S/S Unibar One End – Recessed	Lacing
No image	RSSU2	S/S Unibar Both Ends – Recessed	Lacing
	SL2	Spiral Laced Both Ends	Lacing
	SSA1	S/S Alligator Laced One End	Lacing
	SSA2	S/S Alligator Laced Both Ends	Lacing
	SSU1	S/S Unibar One End	Lacing
	SSU2	S/S Unibar Both Ends	Lacing

Contact Us Today

Part #: 4-1500

Part Number: 4-1500

Related Documents

Related Documents

Fabrications for Belt Specification