Literature
Literature
Use the links below to download some of our current literature:
- 5-2532: 2 Ply 220 3/16" x 1/16" MOR
- 5-8731: Continuous Chevron Flyer
- 3-3713: 2 Ply Sawtooth Flyer
- 5-4833: 4 Ply 440 1/4" x 1/16" HT Flyer
- SpeedSplice Tutorial
- Rubber Snow Plow Blades
- 5-3802: 3-Ply 600 3/8" X Bare MOR
- Skirtboard Roll Stock
- Heavy Rubber Line Card
- Ziplink Solutions Brochure
- 3-1600: 2 Ply Gray Sticky Top
- 4-2003: 3 Ply Black OHGR
- 1-1250: 2 Ply Poli-Glide
- Mulhern Belting Digital Brochure
- 5-3635: 3 Ply 600 1/16" x 1/16" M-MOR-SC
- 5-3841: 3-Ply 600 3/8” x 1/8"
- Super Screw Brochure
- Package Handling Brochure
- Bucket Elevator Brochure
- Recycling Brochure
- 5-5881: M-Flex Straight Warp, 1/440, 1/4 x 1/8
- 5-6111: M15 Open Chevron, 2 Ply 220 3/16 x 1/16 Flyer
- Stone Slinger Flyer
- Hot Asphalt Flyer
- High Temp Belting Flyer
- Versa Cleat Flyer
- Legacy 'Big-Green' Brochure
Forms
Forms to spec in thermoplastic and rubber profiles, bucket punches and perforations.
Belt Formulas and Technical Data
Forms to spec in thermoplastic and rubber profiles, bucket punches and perforations.
- Profile Minimum Pulley Diameter Chart – Refer to this chart for minimum recommended pulley diameter when using profiles.
- Chemical Resistance Chart – This chart can be used to find out the chemical resistance of compounds.
- Recommended Lacing Chart – Consult this chart to find out which lacing is recommended for use with which belt specification.
- Belt Squaring – A primer on how to properly square a belt for lacing.
- Tolerances – NIBA length and width tolerances.
- Formulas – Commonly used belt calculation formulas.
- Ziplink Splice Procedure – A primer on how to properly splice a Ziplink belt.
- Profile Minimum Pulley Diameter Chart – Refer to this chart for minimum recommended pulley diameter when using profiles.
- Chemical Resistance Chart – This chart can be used to find out the chemical resistance of compounds.
- Recommended Lacing Chart – Consult this chart to find out which lacing is recommended for use with which belt specification.
- Belt Squaring – A primer on how to properly square a belt for lacing.
- Tolerances – NIBA length and width tolerances.
- Formulas – Commonly used belt calculation formulas.
- Ziplink Splice Procedure – A primer on how to properly splice a Ziplink belt.
